Filter
Top Products
20 21
BAGEL FUNCTION
Elements
Top and bottom heating elements cycle on
and off to regulate the correct temperature.
Rack Position
Middle rack height position.
Optional Settings
FROZEN FOODS button.
The BAGEL function crisps the insides of
your cut bagel while only lightly toasting
the outside. This function is also ideal for
toasting crumpets or thick sliced specialty
breads which require one side to be
toasted more than the other.
NOTE:
If you like your bagel halves equally
crisp on both the top and bottom,
we recommend using the TOAST
function to toast your cut bagel.
1. Insert the wire rack into the middle rack
height position. The wire rack should
be positioned with the spokes facing
upwards.
2. Slice each bagel into two equal halves.
3. If toasting 1-3 bagel halves, center
the halves on the wire rack. If toasting
4-6 halves, evenly space them with 2-3
halves at the front of the wire rack and
2-3 halves at the back of the rack.
NOTE:
The inside (cut side) of the bagel
must always face upwards towards
the top heating elements. This
allows the cut side to be crisp while
the crust is only lightly toasted.
OPERATING YOUR BREVILLE SMART OVEN™ — BAGELOPERATING YOUR BREVILLE SMART OVEN™ — TOAST
For example, raisin toast, white
light-textured breads or thinly sliced bread
may require a lighter setting, whilst heavier
textured rye, whole wheat or fresh breads
may require a darker setting.
b) The number of slices is displayed as
the bottom figure on the LCD screen.
Turn the TIME dial to the left to reduce
the number of slices, or to the right
to increase the number of slices. The
number of slices range from '1' to '6'.
NOTE:
Your customized TOAST browning
setting and number of slices will
remain in the memory of the oven
until you change them or unplug the
oven from the wall outlet. When the
oven is plugged back into the wall
outlet, the TOAST function will
automatically return to the preset
browning setting '4' and preset
number of slices '4'.
6. Press the START/CANCEL button to
activate this setting. The button
surround will illuminate red, the oven
alert will sound and the LCD screen
will illuminate orange.
7. The timer will be displayed and begin to
count down. The time can be adjusted
during the toasting cycle by turning the
TIME dial.
NOTE:
Element IQ™ will automatically
adjust the toasting time depending
on the heat already present inside
the oven. For example, if the oven
is already warm after one cycle of
toasting, the toasting time for the
second cycle will be less.
During the toasting cycle,
condensation may form on the oven
door and steam may be emitted.
This is normal. Condensation
and steam occur as a result
of the moisture content of the
bread. Freshly baked and frozen
breads generally produce more
condensation.
8. At the end of the toasting cycle, the
oven alert will sound three times. The
START/CANCEL button surround will no
longer illuminate red and LCD screen will
illuminate blue.
THE OUTER SURFACE OF THE
OVEN, INCLUDING THE OVEN
DOOR, IS HOT DURING AND
AFTER OPERATION. ALWAYS
USE PROTECTIVE HOT PADS
OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING
OR HANDLING ITEMS FROM
THE OVEN.
9. The toasting cycle can be stopped at any
time by pressing the START/CANCEL
button. This will cancel the cycle. The
button surround illumination will go out
and the LCD screen will illuminate blue.
4. Close the oven door.
Turn the FUNCTION dial until the
indicator on the LCD screen reaches the
BAGEL function. The top figure on the
LCD screen indicates the preset
browning setting '4', while the bottom
figure on the LCD screen indicates the
preset number of bagel halves '4'.
5. The browning setting and number of
bagel halves can be adjusted before or
during the bagel cycle.
a) The browning setting is displayed as
the top figure on the LCD screen.
Turn the TEMPERATURE dial to the
left to reduce the browning setting, or
to the right to increase the browning
setting. The browning settings are
indicated by the row of circles at the
PRESS