Filter
Top Products
26
CARE & CLEANING
CLEANING THE FILTERS, FILTER
HOLDER AND BREWING HEAD
• The stainless steel Filters and Filter
Holder should be rinsed under water
directly after use to remove all coffee
particles. Should the fine holes in the
filters become blocked, the fine pin on
the Cleaning Tool can be used to clear
the holes.
• The Brew Head interior should be wiped
with a damp cloth to remove any ground
coffee particles.
• Periodically run water through the
machine with the Filter Holder in place,
but without any ground coffee, to rinse
out any residual coffee particles.
CLEANING THE OUTER HOUSING /
CUP WARMING PLATE
• The outer housing and cup warming
plate can be cleaned with a soft, damp
cloth (do not use abrasive cleansers,
pads or cloths which can scratch
the surface).
CLEANING THE DRIP TRAY
• The Drip Tray should be removed,
emptied and cleaned at regular intervals,
particularly when the Drip Tray Full
Indicator is showing full.
• Remove the Drip Tray Full Indicator
and Grid from the Drip Tray, wash with
warm soapy water, using a non-abrasive
washing liquid, rinse and dry thoroughly.
• If further cleaning is required the full
indicator can be removed from the drip
tray by releasing the side snaps.
CLEANING THE STORAGE TRAY
• The Storage Tray can be removed after
the Drip Tray is removed then cleaned
with a soft, damp cloth (do not use
abrasive cleansers, pads or cloths which
can scratch the surface).
NOTE
Do not clean any of the parts or
accessories in the dishwasher.