Filter
Top Products
1
2
3
4
5
6
7
8
33
LABEL PRINTING
Tape Cutting Options
Tape Cutting Options
Setting Description Example
Large
Margin
Automatically cuts the tape after each label is
printed, leaving a margin of 0.96" (24.5 mm)
on each end.
Small
Margin
Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a
0.08" (2 mm) margin at both ends of each
label.
Chain
• Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a 0.08"
(2 mm) margin at
both ends
of each label.
• Once the last label is printed, the tape is not
fed and cut. Press the
Feed & Cut
key to feed
and cut the tape.
No Cut
• Select this setting when printing multiple
copies of a label and you do not want the
labels cut after each label is printed, or when
using Fabric Iron-On Tapes or other special
tapes that cannot be cut by the tape cutter of
the P-touch labeler.
• Once the label is printed, the tape is not fed
and cut.
• Press the
Feed & Cut
key to feed and cut
the tape.
• When using the special tapes that cannot
be cut by the tape cutter of the P-touch
labeler, remove the tape cassette from the
P-touch labeler and use scissors to cut the
tape.
ABC ABC
0.96”
(24.5mm)
0.96”
(24.5mm)
ABC ABC
0.08”
(2mm)
0.96”
(24.5mm)
0.08”
(2mm)
ABC ABC
0.08”
(2mm)
0.96”
(24.5mm)
0.08”
(2mm)
ABC AB
0.96”
(24.5mm)
0.16”
(4mm)