Filter
Top Products
LABEL PRINTING
34
Adjusting the Label Length
You can adjust the length of the printed label in a range of -3 to +3.
Press the
Adjustment
key.
Select "Label Length" using the or key and set the
value using the or key.
Press the
OK
or
Enter
key to apply the setting.
Special
tape
• Select this setting when using special tape.
• When using Fabric Iron-On Tapes, select "No
Cut" for Cut Options before printing. After
printing, remove the tape cassette from the
P-touch labeler and use scissors to cut the
tape.
• When multiple copies
are printed one time:
• When a label is printed
two times:
1. 1st print
2. 2nd print
Setting Description Example
ABC
ABC ABC
0.96”
(24.5mm)
0.16”
(4mm)
0.16”
(4mm)
ABC ABC
0.96”
(24.5mm)
1.04”
(26.5mm)
12
Adjusting the Label Length
1
2
3
•Press the Esc key to return to the previous step.
•Press the Space key to set the value to the default setting.
• One level is equal to approximately 1% of the total label length.