Filter
Top Products
4-17
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 4 Configuring Cisco EnergyWise
Troubleshooting EnergyWise
Using CLI Commands
For more information about the commands, see the command reference for this release.
Verifying the Power Usage
• This example shows that the Cisco 7960 IP Phone uses 6.3 watts and that the Cisco 7970G IP Phone
uses 10.3 watts.
Switch# show energywise usage children
Interface Name Usage Caliber
--------- ---- ----- -------
Switch 144.0 (W) max
Gi0/1 Gi1.0.1 6.3 (W) trusted
Gi0/2 Gi1.0.2 10.3 (W) trusted
Ta ble 4-2 EnergyWise Commands
Command Purpose
clear energywise neighbors privileged EXEC Delete the EnergyWise neighbor tables on the entity. It immediately
discovers the neighbors and recreates the table.
no energywise interface configuration Disable EnergyWise on the PoE port.
no energywise domain global configuration Disable EnergyWise on the entity.
Ta ble 4-3 show Privileged EXEC Commands
Command Purpose
show energywise Display the settings and status for the entity.
show energywise children Display the status of the entity and the PoE ports in the
domain.
show energywise domain Display the domain to which the entity belongs.
show energywise events Display the last ten events (messages) sent to other entities
in the domain.
show energywise neighbors Display the neighbor tables for the domains to which the
entity belongs.
show energywise recurrences Display the EnergyWise settings and status for recurrence.
show energywise statistics Display the counters for events and errors.
show energywise usage Display the current power usage on the entity.
show energywise version Display the current EnergyWise version.
show power inline Display the PoE status.
show cdp neighbors Display the neighbors discovered by CDP.