8-3
Catalyst 3560 Switch Software Configuration Guide
OL-8553-06
Chapter 8 Configuring SDM Templates
Configuring the Switch SDM Template
Configuring the Switch SDM Template
These sections contain this configuration information:
• Default SDM Template, page 8-3
• SDM Template Configuration Guidelines, page 8-3
• Setting the SDM Template, page 8-4
Default SDM Template
The default template is the default desktop template. .
SDM Template Configuration Guidelines
Follow these guidelines when selecting and configuring SDM templates:
• When you select and configure SDM templates, you must reload the switch for the configuration to
take effect.
Ta ble 8-2 Approximate Feature Resources Allowed by Dual IPv4-IPv6 Templates
Resource
IPv4-and-IPv6
Default
IPv4-and-IPv6
Routing
IPv4-and-IPv6
VLAN
Unicast MAC addresses 2 K 1536 8 K
IPv4 IGMP groups and multicast routes 1 K 1K 1 K
Total IPv4 unicast routes: 3 K 2816 0
• Directly connected IPv4 hosts 2 K 1536 0
• Indirect IPv4 routes 1 K 1280 0
IPv6 multicast groups 1 K 1152 1 K
Total IPv6 unicast routes: 3 K 2816 0
• Directly connected IPv6 addresses 2 K 1536 0
• Indirect IPv6 unicast routes 1 K 1280 0
IPv4 policy-based routing ACEs 0 256 0
IPv4 or MAC QoS ACEs (total) 512 512 512
IPv4 or MAC security ACEs (total) 1 K 512 1K
IPv6 policy-based routing ACEs
1
1. IPv6 policy-based routing is not supported.
0 255 0
IPv6 QoS ACEs 510 510 510
IPv6 security ACEs 510 510 510