Filter
Top Products
23
Chapter 2 Printer Operation
Menu Setup Mode (p.35)
Normal Operating Mode
When the power is turned on, the printer enters normal operating
mode. The control keys activate the following functions.
4 3
2
1
1
MENU key:
Performs selection of Menu Setup Mode and re-printing
• In normal operation, this key will enter the Menu Setup Mode
• The last label can be reprinted by pressing the MENU key in Normal
operating mode. Printing of the nal label is performed based on
the setting of “Menu Key Action” in “After Print” menu.
If MENU key has been set to re-print, press the menu key for at least
4 seconds to shift to Menu Setup Mode.
2
Feed key: Feeds media
• Pressing this key feeds media to the print start position. The
distance it is fed is determined by automatically detecting the front
end of the media when using label media, and when continuous
media has been designated, a xed quantity is fed, then feeding
stops.
• When the TEAR OFF setting is eective, feeding stops when the
media has been fed to the TEAR OFF location.
• When the optional cutter unit is installed, the media is fed to the cut
position then it is cut.
• If the optional peeler unit is installed, the media is fed to the peeling
location. When the media is pausing at the peeling position, feeding
does not occur, even if the Feed key is pushed.
3
Stop key: It stops printing and cancels the alarm
• Pushing this key once during printing puts the printer in pause
mode after the label is issued. It is possible to cancel 1 batch of label
issuing data by pressing the Stop key for 4 seconds or longer in
pause status. (The LCD indicates “Job Clear” during cancel.)
4
Pause key: Temporarily pauses printing
• When this key is pushed once, the LCD indicates “Pause” and the
printer temporarily pauses.
• When it is pushed during printing, the printer pauses after the label
currently being printed is issued. Pressing the key a second time
restarts printing and the remaining number of designated labels are
printed.