Filter
Top Products
29
Chapter 2 Printer Operation
7. Lift the sensor arm up temporarily and adjust the media
guide. Align the media with the left xed media guide, align
the right movable media guide with the media width, and
lower the sensor arm.
Movable media
guide
Fixed media guide
Sensor arm
8. Push the head close knob to lower and lock the head unit.
Be sure to always push the head close knob to lock the head
unit. Align it with the width of the media that has been set,
then set the media width and media thickness adjustment
dials. See “Chapter 3 Printer Adjustments”.
Head unit
Head close knob
Media thickness
adjustment
Media width adjustment
9. With the power switched on, push the Feed key to feed the
media.
It will halt at the next print start position.
Setting the Media
Media Thickness Adjustment
(p.59)
Media Width Adjustment
(p.60)