Citizen CL-E720 Slow Cooker User Manual


 
54
Chapter 2 Printer Operation
Note:• TheEmulationAuto-Detectionfunctionwillnotworkifthe
“Emulation Auto Detect” command in the Sub Menu in the
“System Setup” in the Top Menu is set to “O ”. (The command is
set to “On” when shipped from the factory)
• AftertheEmulationAuto-Detectionfunctionisactivated,this
function will not work unless the printer is turned O and then
turned On again.
• Ifthe“EmulationAutoDetect”functionissetto“FullAuto”,this
will cause the printer to automatically restart when it detects
an alternative emulation. This is useful for remotely located
machines where the control panel cannot be accessed.
Emulation Auto Detect: Cross-Emulation
TM