Filter
Top Products
15
Using Rethermalization Mode
Turn the MINI on with the ON/OFF key.
1. Press the Retherm key.
a. The display shows the last nominal values selected or the default values for rethermalizing.
b. To start immediately, press the Start/Stop key.
OR:
1. Press the Temperature key.
• The oven temperature appears on the display.
• Set the required oven temperature from 248°F to 320°F with the Selector Dial.
2. Select Time or Core Temperature mode:
• Time: Press the Time key. Set the desired cooking time or select continuous mode (at 9:59 or
0:01, release the Selector Dial and then turn again to the left or the right until
- : - -
appears).
• Core Temperature: Press the core temperature key and set the desired core temperature.
2. Press the Start/Stop key.
• Retherm mode starts.
• The display shows the nominal oven temperature and the rethermalizing time remaining OR the
actual core temperature.
3. To change the set values while operating, press the Temperature, Time, or Core Temperature key
and set the temperature, time or core temperature with the Selector Dial. The new value appears in
the display
4. To read the actual oven temperature, nominal cooking time, and nominal core temperature: press
the relevant key either once or twice needed.
5. When the set time has elapsed or the core temperature has been reached, the Signal Tone sounds
and the recipe ends.
6. Press the Start/Stop key or open the door to stop the Signal Tone.
The following advanced functions are available through the Smart Key when “Retherm” mode is ON:
Tray Timer
Pre-Heating
Vapor Reduction
See Chapter 5, “Advanced Functions” for details.