Filter
Top Products
22
B. Tray Timer
• The MINI oven must be ON and operating in a cooking mode before the Tray Timer can be set.
• The Tray Timer function provides up to twenty (20) timers for mixed oven loads to keep track of
the optimum finish for each different dish.
• The Tray Timer is NOT a programmable function.
• The Tray Timer icon does NOT appear while the Tray Timer is in use.
• There is no connection between individual Tray Timers and the position or placement of food in the MINI.
• Tray Timers do not stop counting down while the MINI door is open.
• While this allows great flexibility in use, careful planning is strongly recommended to make best
use of the Tray Timer function.
To use the Tray Timer:
1. Select Mode: Steam, Combi, Hot Air, or Retherm.
2. Set the timer to Continuous (
- - : - -
) before using the Tray Timer.
3. Set the temperature.
4. START the selected cooking mode with the Start/Stop key.
5. The oven on icon must appear before the Tray Timer can be set.
6. Press the Smart Key.
7. Various options appear in the display.
8. Select Tray Timer with the Selector Dial.
9. Confirm by pressing the Smart Key.
10. The display shows the nominal (set) time on the left, and time remaining on the right.
Timer No. Set Time Time Remaining
Timer 1: 00:00 00:00
Timer 2: 00:00 00:00
Timer 3: 00:00 00:00
11. Select the desired Tray Timer (Timer 7, for example) with the Selector Dial.
12. Use the scroll right (arrow) key to navigate to the nominal time.
13. Set the Tray Timer with the Selector Dial.
14. Use the scroll left (arrow) key to navigate back to the Tray Timer column.
15. Select the next desired Tray Timer with the Selector Dial.
16. Repeat steps 12, 13, and 14 as desired, to set up to twenty (20) individual Tray Timers.
17. The Tray Timers START COUNTING DOWN as soon as a time greater than 0:00 is entered.
18. Exit the Tray Timer function with the Smart Key, or Start/Stop key.
19. When the set time on a Tray Timer has elapsed, the Signal Tone sounds.
20. Press the Start/Stop key or open the door.
21. Take appropriate action (check food, load, unload, stir, etc.)
22. Use steps 6-18 to reset an individual Tray Timer to 0:00. The countdown and Signal Tone for
that Tray Timer stops and makes that Tray Timer available for use.
23. Individual Tray Timers may be added or adjusted as needed without affecting the other Tray Timers by
using steps 6-18 without changing the time to 0:00.
NOTE: The Tray Timers CONTINUE TO COUNT DOWN after a Signal Tone sounds, and the
Start/Stop key is pressed and / or the oven door is opened.