Filter
Top Products
What is the EarthSmart ECM Series
Chiller?
The Conair EarthSmart ECM Series Chillers provide self-contained sources of
chilled water and are available with compressor ranges of 0.5 Hp or 0.75 Hp
(nominal capacities of 0.41 tons or 0.70 tons of refrigeration).
IMPORTANT: Nominal chilling capacities are based on 95°F {35°C} ambient air conditions and
processing 50°F {10°C} leaving water.
ECM Series Chillers are designed to provide chilled fluid for industrial applica-
tions requiring 24-hour-a-day performance. Units are totally self-contained for
easy, economical installation. All parts wetted by the process are non-ferrous.
Typical Applications
ECM Series Chillers can be used anywhere a reliable source of process cooling
water at temperatures ranging from 45° to 65°F {7.2°C to 18.3°C} is required.
These chillers at full load, will discharge approximately 7,500 or 12,500
BTU/hr of heat into the atmosphere (depending on model).
Chillers are available for:
● Injection molding ● Dryer intercoolers/aftercoolers
● Blow molding ● Heatset/web offset printing presses
● Thermoforming ● Degreasing
● Extrusion ● Laser
● Air compressors ● Anodizing
● Metal plating
2-2 l Description
NOTE: Chiller’s environment
and cooling temperatures
below the default cooling
ranges will affect cooling
capacities.
✐