Filter
Top Products
Cleaning the Pump Strainer (continued)
6 Remove the strainer from its housing.
7 Inspect the strainer for holes or blinding, clean or replace as necessary.
8 Re-install the strainer and strainer cap. Properly seal all piping with approved
Teflon tape or pipe dope.
9 Check to ensure no leaking has occurred before returning the chiller to normal
operation.
Replacement strainers are
available from Conair.
Contact Conair Parts
(800) 458 1960
From outside of the
United States, call:
(814) 437 6861
IMPORTANT: Check to ensure the strainer is properly seated before applying the strainer
cap. Crushing of the strainer can occur if it is not fully inserted back into the strainer
housing.
5
Maintenance
Maintenance l 5-11