Filter
Top Products
Installation l 3-3
3
Installation
Warnings and Cautions
WARNING: Improper installation, operation, or
servicing may result in equipment damage or
personal injury.
This equipment should only be installed, adjusted and serviced by a qualified
technician who is familiar with the construction, operation and potential
hazards of this type of machine.
All wiring, disconnects and fuses should be installed by a qualified electrical
technician in accordance with electrical codes in your region. Always maintain
a safe ground. Do not operate this equipment at power levels other than what
is specified on the machine data plate.
CAUTION: Hot Surfaces
Always protect yourself from hot surfaces when working on the chiller,
especially when working on or around the compressor and condenser. These
devices can over 160°F {71°C}. Allow these devices to cool before performing
any maintenance or troubleshooting.
CAUTION: Ventilation
The unit requires a clean and well ventilated operating environment. Do not
place anything on top of the unit while operating.
Units require enough clearance around the perimeter for access panels to be
removed completely. Units require a minimum of 2 ft {0.6 m} clearance around
the perimeter for proper air flow.
WARNING: Refrigerant hazard
Only certified refrigerant technicians should examine and correct problems
involving the refrigerant circuit.