Filter
Top Products
50
OTHER CONVENIENT FEATURES
CLEANING AND CARE
KITCHEN TIMER
• Suppose you want to time a 3 minute long distance phone call.
1. Touch KITCHEN TIMER pad.
2. Enter time by touching the number pads 300.
3. Touch START pad.
START
START allows you to cook at 100% power by touching the START pad continuously.START is ideal for
melting cheese,bringing milk to just below boiling etc.
The maximum cooking time is 3 minutes.
• Suppose you want to melt cheese on a piece of toast:
1. Continuously touch the START pad.The cooking time will begin counting up.
2. When the cheese is melted to desired degree,remove finger from START pad.Microwave oven stops
immediately.
Note:
1. Note time it takes for frequently used foods and program that time in the future.
2. To use START, touch pad within 1 minute after cooking, opening and closing the door or touching
the STOP/CLEAR pad.
3. START can only be used 3 times in a row. If more times are needed, open and close door or touch
STOP/CLEAR.
HELP (DISPLAY INDICATOR)
Each setting of DEFROST, AUTO BROIL, AUTO ROAST, AUTO BAKE, SENSOR COOK and SENSOR has a
cooking hint. If you wish to check,touch HELP MENU pad whenever HELP is lighted in the Interactive
Display for these hints.
DEMONSTRATION MODE
To demonstrate, touch CLOCK, the number 0 and then touch START pad and hold for 3 seconds.
DEMO ON will appear in the display. Cooking operations and specific special features can now be
demonstrated with no power in the microwave oven.For example,touch EXTRA MINUTE pad and the
display will show 1.00 and count down quickly to END.
To cancel, touch CLOCK, then the number 0 and STOP/CLEAR pads. If easier, unplug the microwave
oven from the electrical outlet and replug.
Disconnect the power cord before cleaning or leave the door open to inactivate the microwave oven
during cleaning.
Exterior
The outside surface is painted. Clean the outside with mild soap and water; rinse and dry with a soft
cloth.Do not use any type of household or abrasive cleaner.
Door
Wipe the window on both sides with a damp cloth to remove any spills or spatters.Metal parts will be
easier to maintain if wiped frequently with a damp cloth. Avoid the use of spray and other harsh
cleaners as they may stain,streak or dull the door surface.
1.CMO24SS_DCS 374 E.qxd 4/21/04 9:43 AM Page 50