22
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
OR
SEMI-AUTOMATIC COOKING - ONLY END OF COOKING
This automatically switches off the oven after the required cooking time.
Two methods of semi-automatic cooking are available:
1
ST
METHOD: Programming the duration of the cooking
• Set the oven (function and temperature) as indicated in the “USING THE OVEN - COOK-
ING FUNCTIONS” chapter.
•
Set the duration of the cooking (“hh:mm” - hours and minutes) by pressing button
“”
(“ : ” symbol flashes on the programmer display) and then button “ ” to move
forward or “ ” to move back if you have gone beyond the required time. Set it
to ten minutes less than the time required because the stored heat will complete the cook-
ing.
•“A” letter and “ ” symbol appear on the programmer display; the oven starts to operate
immediately and it will switch off automatically at the end of the cooking time (an inter-
mittent acoustic signal sounds, the “A” letter and “ ” symbol flash on the programmer
display and the oven lamp is lit - press any pushbutton of the programmer [not ON/OFF]
to stop the intermittent acoustic signal).
• During cooking press button “ ” (press two times if the oven lamp is not lit - first
press lights only oven lamp) to display the remaining duration of the cooking (countdown).
• During cooking press button “ ” (press two times if the oven lamp is not lit - first
press lightsonly oven lamp) to displa y the time when cooking will be completed.
• The cooking program can be cancelled at any time as indicated in the "CANCELLING A
SET PROGRAMME" chapter.
1 - Time when the oven is programmed (10:00)
2 - Time necessary to cook the food (2 hours)
3 - Time when cooking will be completed (12:00)
CAUTION: after a black-out three zeroes
"0:00" appear on the display.
The semi-automatic cooking is cancelled.
Example