Filter
Top Products
38
ADVICE FOR USE AND MAINTENANCE OF CATALYTIC PANELS
The catalytic panels are covered with special microporous enamel which absorbs
and does away with oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling”
on max temperature for about 30 minutes.
These panels do not require to be cleaned, however it is advised to periodically
remove them from the oven and to wash them with tepid soapy water and then
wipe off with a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH
PRODUCTS CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the catalytic microporous enamel degrades,
they can be turned to the other side.
GRILL HEATING ELEMENT
■ The heating element is self-cleaning and does not require maintenance. The grill
is secured to the rear wall of the oven on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (fig. 6.2).
GREASE FILTER
■ Clean the filter after any cooking!
The grease filter can be removed for cleaning and should be washed regularly
in hot soapy water (fig. 6.3).
■ Always dry the filter properly before fitting it back into the oven.
Fig. 6.3