DeLonghi EMFPS 60 B Oven User Manual


 
39
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the lamp
to avoid the possibility of electric shock.
Let the oven cavity and the heating elements to cool down;
Switch off the electrical supply;
LEFT LAMP:
Remove the left sliding shelf and the side catalytic panel by unscrewing the
fixing screws (see chapter REMOVING AND REASSEMBLING THE SLIDING
SHELVES AND THE CATALYTIC PANELS at page 37).
Press down from the top the protective cover A (fig. 6.4) and remove it by
rotating on the lower side. IMPORTANT: never use screwdrivers or other
utensils to remove the cover A. This could damage the enamel of the oven or
the lampholder. Operate only by hands.
Unscrew and replace the bulb B with a new one suitable for high tempera-
tures (300°C) having the following specifications: 230-240V 50 Hz, 25W, E14.
Refit the protective cover A operating in reverse order. ATTENTION: the notch
in the inner edge of the cover must be oriented toward the lamp.
Assemble the side catalytic panel and the left sliding shelf.
TOP RIGHT LAMP:
Remove the protective cover C (fig. 6.4);
Unscrew and replace the bulb B with a new one suitable for high tempera-
tures (300°C) having the following specifications: 230-240V 50 Hz, 25W, E14
Refit the protective cover;
NOTE: Oven bulb replacement is not covered by your guarantee.
A
B
B
C
1
2
A
A
Fig. 6.4