Filter
Top Products
Operating Instructions
66
: Caution! Do not use the appliance if damaged. In the event of a fault
or failure, switch off at the mains /fuse box or take out the fuses.
In the event of a fault, visits by technicians from Customer Service or
dealer may not be covered by guarantee, even during the warranty pe-
riod.
Service Symbol and Error Codes
Any faults in the electronic control system are indicated by Ç on the
display field, and an error code replaces the temperature display.
• Switch off the circuit-breaker.
• Switch on again after several minutes.
• Switch on the oven again.
• If the Ç symbol appears again, contact your local Service Force
Centre and give the model number (see Chapter “Service“) and Error
Code, for example, "001".
3
Cooling continues to operate for safety reasons. If necessary, switch off
the appliance at the circuit-breaker again.