Filter
Top Products
THINGS YOU NEED TO KNOW
This cooker must be installed by a qualified electrician/competent person (CORGI Registered). Safety
may be impaired if installation is not carried out in accordance with these instructions.
Before connecting the cooker make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate. The rating plate can be seen by opening the grill door.
Do not alter the electrical circuitry of this cooker.
CHOICE OF ELECTRICAL CONNECTION
The cooker should be operated using at least 6mm² twin core and earth PVC insulated multicore
cable.
By connecting the cooker to a cooker point having a double pole isolating switch providing at least
3mm contact separation in all poles and protected with a fuse or miniature circuit breaker at your
mains fuse box.
NOTE: It is good practice to:
Fit an Earth Leakage Circuit Breaker to your house wiring.
Wire your appliance to the latest IEE regulations.
THINGS TO NOTE
If this cooker is to be fitted between cabinets the recommended dimensions as shown in Fig. 1 and
the instructions on 'Location of appliance' must be followed.
Enquiries regarding the installation of the cooker point if required should be made to your Regional
Electricity Company to ensure compliance with their regulations.
The cooker point should be within 2m of the cooker to make it accessible to switch off the cooker in
case of an emergency.
NOTE: HOUSE CIRCUIT
Earth leakage / continuity tests must be carried out before the cooker is connected to the mains supply
and re-checked after fitting.
INSTALLATION INSTRUCTIONS
WARNINGS:
Warning: This cooker must be earthed.