To remove the cover:
1.
Hold cover firmly with both hands and lift
front of cover off supports.
2. Lift cover out by pulling up
and out.
To
replace the cover:
Remove the giasr
insert. Lii the
cover front, then
the beck
1.
Pii back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
NOTE: Hendie
giarr inoeti with
care. it I8 heavy.
Removing the snack bin
(on some models)
To remove the snack bin:
1.
Slide snack bin straight out to the stop
with an even, constant motion.
2. Lift the front.
3. Slide bin out the rest of the way.
4. Replace in reverse order.
Removing the freezer bin/basket
To remove the bIdbasket:
1. Slide bin out to the stop.
2.
Lii the front to clear the stop.
3. Slide bin out the rest of the way.
To replace the bin/basket:
1.
Place bin on the slides.
2. Make sure the wire stops clear the front
of the slides.
Pull out to the atop, lift
the front, and
pull again.
3. Slide bin in all the way.
Removing the freezer shelf
To remove the shelf:
1.
Lii right side of shelf off supports.
2. Slide shelf out of shelf support holes.
3. Replace in reverse order.