Filter
Top Products
Removing the ice maker storage bin
Remove, empty, and clean the storage bin if:
l
the ice dispenser has not, or will not, be
used for a week or more.
l
a power failure causes ice in the bin to
melt and freeze together.
l
the ice dispenser is not used regularly.
To
remove ice bin:
1. Pull the covering panel out from the
bottom and slide it to the rear.
2. Lii the signal
arm
so it clicks into the OFF
(up) position. Ice can still be dispensed,
but no more can be made.
3. Lii the front of the storage bin and pull
it out.
4. Empty the ice bin. Use hot or warm water
to rneft the ice if necessary. Never usa
anything sharp
to break up ice in the
bin. This can damage the bin and dis-
penser mechanism.
5. Wash
with mild detergent. Rinse well. Do
not use harsh or abrasive cleaners or
solvents.
6. When replacing the bin, make sure it is
pushed in
all
the way. Then push the
signal arm
down to the ON position to
restart ice production.
15