Filter
Top Products
Connecting to refrigerator
1. (On kii models, assemble water valve to
refrigerator per kit instructions.) Route the
copper tubing through the tube clamp
provided as shown at left. Connect the %
inch copper tube from the shut-off valve
to the water valve at the lower, left rear of
cabinet. Use a compression nut and
sleeve as shown at left. Tighten the
compression nut. Do not overtighten.
2. Turn shut-off valve ON. CHECK FOR
LEAKS. TIGHTEN ANY CONNECTIONS
(INCLUDING CONNECTIONS AT THE
VALVE) OR NUTS THAT LEAK.
3. The ice maker is equipped with a built-in
water strainer. If local water conditions
require periodic cleaning or a well is your
source of water suppty, a second water
strainer should be installed in the
%-inch water line. Obtain a water strainer
from your nearest appliance dealer.
Install at either tube connection.
4. Reconnect electriil supply to refrigerator.
Uee only Wnch
copper tublng
from cold
water line
Tube clamp
- %-Inch compree-
don nut end
l l88ve
18