Filter
Top Products
Removing the base grille
To remove the grille:
1. Open
both doors.
Condenser coils
2. Pull base grille forward to release the
support tabs from the metal clips.
3.
Do not remove Tech Sheet
fastened
behind the grille.
To replace the
grille:
1.
Line up grille support tabs with metal
clips.
2. Push firmly to snap into place.
3. Close the doors.
See cleaning instructions for defrost pan and
condenser coils on page 23.
Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either
unplug the refrigerator or disconnect the
electricii leading to it
at
the main power
WPb-
Failure to do so could result in personal
injury.
To change refrigerator light:
1.
Disconnect refrigerator from power supply.
2. Reach behind the Control Console to
remove bulb.
3. Replace bulb with a U-watt appliance bulb.
4. Reconnect refrigerator to power supply.
To change crisper light:
1.
Disconnect refrigerator from power supply.
2. Pull top of light shield forward until it snaps
free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 4Ckwatt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect refrigerator to power supply.
m
m
I
I
) 7 \ Refrige;;
risper
light
19