Filter
Top Products
16. Insert the safety key supplied with the machine into the
door switch. The machine is now on.
Using the service keypad located in the rear of the
door (photo), proceed as follows:
a. Press the Cup Test switch (7) and check that a
cup is ejected correctly from the Cup drop unit.
b. Press the Park Head switch (8) to ensure that the
dispense head operates correctly and that the
dispense pipes are fitted correctly.
c. Place a suitable container under the dispense head and press the Rinse/Flush
switch (3). The machine will flush the system. Check that all of the mixing
stations are water tight. Empty the contents of the container.
d. Place an empty cup under the dispense head. Press the Test Vend switch (6)
and using the selection buttons on the front of the machine, vend a drink to
ensure that the machine operates correctly. Press the ‘X’ (Exit) key to exit
from the Test Vend menu.
e. Press the View Counters switch (5) and record the audit information
displayed on the LCD (see page 33 for full details).
Remove the safety key and close the door. Clean and buff the outside of the
machine.
4.6 Paper Type (King) Freshbrew Brewer Cleaning Procedure
At least twice a week the paper type brewer unit must be removed from Evolution
freshbrew machines and cleaned.
Safety First! Never clean or service the brewer unit while it is in motion as
fingers may become trapped in the mechanism.
1. Open the front door of the machine and remove the paper/waste ingredient
guard. Switch on the power using the door switch safety key.
2. Press and hold the Brewer Open switch (2) located in
the service keypad on the rear of the door to index
the brewer to its fully open position.
When the brewer reaches its fully open position,
remove the safety key to switch off the power. Tear
the filter paper above the brewer (a). Remove the used
paper from the brewer unit.
Operators Manual
25
a