Filter
Top Products
March 2004 Manual 599082
- 39 -
9.7 Filter Plate Removal
9.7.1 Remove the lower racks from the tub.
9.7.2 Remove the drain filter assembly.
9.7.3 Rotate the filter plate locknut anti-clockwise to release the filter plate
from the rotor assembly.
9.7.4 Lift the filter plate clear.
9.7.5 Refit in reverse manner.
9.8 Rotor Assembly Removal
9.8.1 Remove filter plate as per instructions 9.7.
9.8.2 Rotate the rotor locking ring anti clockwise to release it from the
motor assembly and lift out.
9.8.3 The rotor assembly is not serviceable.
9.8.4 Refit in reverse manner.
9.9 Wiring Cover Removal
9.9.1 Remove the drawer front as per instructions in 9.1.
9.9.2 With the tub opened release the tub clips and push back the
drawer rails as explained in 9.2.2.
9.9.3 Carefully release the four wiring cover clips from the front
lower section of the tub taking care not to damage them.
9.9.4 Release the three clips on the underside of the tub which
retain the wiring cover.
9.9.5 Pull the tub fully open and lift it up at the front (this makes it
easier to remove the wiring cover from the rear of the tub).
9.9.6 The wiring cover may now be carefully moved forward to
release it from the rear of the tub.
9.9.7 To reassemble first ensure that the wiring harnesses, drain
hose and fill hose are clipped into their correct position.
9.9.8 Then refit in reverse manner