Filter
Top Products
March 2004 Manual 599082
- 42 -
9.13 Lid Removal
9.13.1 Remove tub assembly as per instructions in 9.2.
9.13.2 On the right-hand side of the lid release the two tabs that clip the lid
to the yoke. Repeat for the left-hand side.
9.13.3 The lid is now free to slide out of the chassis.
9.13.4 Refit in the reverse manner taking care that the lid is fitted the
correct way around. The front is indicated on the top of the lid.
9.14 Yoke Removal
9.14.1 Remove the lid as per instructions in 9.13.
9.14.2 Release the lid actuator connecting arm from the bottom of the yoke
by squeezing the two tabs towards each other.
9.14.3 Slide the front of the yoke downwards at an angle until it moves out
of the track in the rear of the trim, and is clear of the chassis flange.
9.14.4 Refit in the reverse manner taking care that the yoke is the correct
way around.