Filter
Top Products
7
Installation instructions (all models)
3. Ventilation and installation
To ensure adequate ventilation for your refrigerator and it’s correct operation see recommended
cabinetry dimensions below.
The appliance is intended to be placed against a wall with a free distance not exceeding 75 mm.
These measurements do not include space for the water filter at the back of the cabinet as we
recommend that the filter is placed as close to the incoming water supply as possible.
Cabinetry dimensions (mm)
(including minimum air clearances) E402B E442B E522B RF610A
A inside height 1745 1745 1745 1810
Flush with refrigerator chassis – full door rotation
B inside width 675 720 830 940
C inside depth 620 620 620 620
Flush with refrigerator door – full door rotation
D inside width 705 750 860 1000
E inside depth flush to curved door 675 675 675 –
F inside depth flush to flat door 690 690 690 690
Flush with refrigerator door – 90° door rotation
G inside width 745 790 900 1010
H inside depth flush to curved door 675 675 675 –
I inside depth flush to flat door 690 690 690 690
Minimum clearances
J side clearance 20 20 20 20
K side clearance – hinge side flush with door – full rotation 50 50 50 50
L side clearance – hinge side flush with door – 90° rotation 90 90 90 90
M rear clearance (incl. evaporator tray) 30 30 30 30
N vent 50 50 50 50