Filter
Top Products
45
US
CA
Troubleshooting
Problem Possible causes What to do
The display flashes
door
(An alarm may also
sound)
The function dial has been
turned to Self clean when the
door is still open.
The door has been opened after
Self clean has been selected but
before the oven has been
started.
The door is open during
cooking.
Close the door and restart the
Self clean sequence.
Close the door and restart the
Self clean sequence.
Close the door. The oven is still
operating normally.
The display shows
Fdor
The door lock is
malfunctioning.
Turn the function dial to OFF.
Wait for the oven to cool down
completely and disconnect the
cooker from the mains power
supply.
Wait a few minutes then
reconnect the mains.
If the display still shows Fdor
disconnect the cooker again
and call your Authorised Service
agent of Customer Care. Do not
use the cooker.
The display shows
F0E0 A
The Self clean cycle has been
stopped and then immediately
re-started.
Note: we advise against
stopping a Self clean cycle and
then immediately starting it
again. Always wait for the oven
to cool completely first.
Turn the function dial to OFF.
Wait for at least 30 minutes and
then start the Self clean cycle
again.
If the error re-occurs call your
Authorised Service Agent or
Customer Care.