Filter
Top Products
41
Care and cleaning
After cleaning, replace the inner glass pane
When replacing the inner glass pane, make sure that:
You replace the pane correctly, as shown. The pane must be in the position described below in
order to fit into the door and to ensure that the appliance operates safely and correctly.
You take extra care not to bump the edges of the glass against any object or surface.
You do not force the pane into place. If you are experiencing difficulties replacing the pane,
remove it and start the process again from the beginning. If this still does not help, call Customer
Care.
Check that you are holding the pane the correct way. You should be able to read the wording on
it as it faces you.
Check that the gasket ‘A’ is in place (Fig. 49). If not, correctly place the gasket in the top edge of
the inner glass (in the centre).
1 Insert the inner glass pane in the uppermost pair of grooves and push it slightly (arrow 1 in
figure 49).
2 Gently lower into place (arrow 2 in figure 49).
1
2
1
2
A
Fig.49 Replace the inner
glass pane