Filter
Top Products
7
Fig. 4 Top of feet to be
screwed in tightly
Installation instructions
256.5 - 281.5
mm (*)
635 - 660
mm (*)
(*) Depending on
feet ad
j
ustment
70.5 mm
70.5 mm
Fitting the adjustable feet
Important!
It is possible to install the cooker above a plinth without fitting the adjustable feet.
In that case the cooker will stand directly above the plinth; make sure you provide safety measures to
keep it in place.
Fit the adjustable feet before using the cooker.
1
Rest the rear of the cooker on a piece of the polystyrene packaging, exposing the base for
fitting the feet.
2
Fit the four feet by screwing them tight into the support base as shown.
Levelling the cooker
Level the cooker by screwing the feet in or out,
as shown in Fig.5.
Fig. 3 Location of feet Fig. 5 Levelling the cooker
Locating the area for gas and electrical connection
Dotted line showing
the position of the
cooker when installed
Area for gas
connection
Area for electrical
connection
Fig. 2 Area for gas and electrical connections