Filter
Top Products
18
Setting the heating mode and the
temperature
You can operate both ovens simultaneously with
different settings.
Exception: during self-cleaning in one oven, you
cannot operate the second oven.
1 Use the function selector to set the type of
heating.
Left function selector: lower oven
Right function selector: upper oven
The selected heating type and suggested
temperature appear on the display.
Example: lower oven, convection, 340° F
(170°C).
2 Turn the rotary selector to set the desired
temperature.
The pre-heat symbol
“ appears on the display. The
bar shows the current pre-heat status. When the set
temperature is reached, a signal sounds, the pre-heat
symbol “ goes out.
Note: With a temperature setting below 160° F
(70°C), the cooking compartment lighting remains
switched off.
If both ovens are switched on, the settings for both
ovens appear on the display. Select the display of the
appropriate oven with Q or R; use P to return to the
display of both ovens.
Switching off:
Set the function selector to 0.
Quick heat
Your appliance reaches the required temperature
particularly fast with the "Quick heat" function.
So you achieve a uniform cooking result, do not place
your meal in the oven interior until "Quick heat" has
ended.
You must activate the "Quick heat" function in the
factory setting (see section entitled Factory setting).
Safety lock
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after
12 hours if the appliance is not operated during this
time. A message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to
0, after which you can
operate the appliance in the manner to which you are
accustomed.
4
3
3
)
4
4
5
5
)
)