Filter
Top Products
24
Core temperature probe
The core temperature probe allows you to cook exactly
to the precise level you require. It measures the
temperature at the inside of the food. The automatic
switch-off when the desired core temperature is
reached ensures that all food is cooked precisely.
Note: The core temperature probe can only be used in
the lower oven.
Only use the core temperature probe supplied with
the cooker. You can purchase it as a spare part from
the after-sales service or in the online shop.
The core temperature probe may be damaged at
temperatures above 480°F (250°C). Therefore, only
use it in your appliance with a maximum temperature
setting of 445°F (230°C).
After use, always remove the core temperature probe
from the cooking compartment. Never store it inside
the cooking compartment.
After each use, clean the core temperature probe with
a damp cloth. Do not clean it in the dishwasher.
9 WARNING
Risk of electric shock
Use of a wrong core temperature probe can
damage the insulation. Use only the core
temperature probe intended for this appliance.
9 WARNING
Risk of burns
The oven interior and the core temperature
probe become very hot. Use oven mitts to plug
and unplug the core temperature probe.
Insert the core temperature probe in
the food to be cooked
Insert the core temperature probe in the food to be
cooked before you place it in the oven interior.
Insert the metal tip at the thickest point in the food
you are cooking. Make sure that the end of the tip is
approximately in the center. It must not be placed in
the fat and must not touch any cookware or bones.
If there are several pieces, insert the core
temperature probe in the middle of the thickest piece.
Insert the core temperature probe completely, if
possible.
In the case of poultry, make sure that the tip of the
core temperature probe is not in the cavity in the
center, but in the meat between the belly and upper
leg.
Setting the core temperature
1 Insert the food to cook in the cooking
compartment with a core temperature probe
inserted. Insert the core temperature probe into
the socket in the top right of the cooking
compartment and close the appliance door.
Be careful not to trap the cable of the core
temperature probe.
On the display, + will appear and the current
core temperature.
2 Turn the function selector to the desired heating
type.
3 Use the rotary selector to set the cooking
compartment temperature.
4 Touch the + symbol. Use the rotary selector to
change the set core temperature for the food and
confirm with +.
The core temperature set must be higher than the
current core temperature.
5 The appliance heats with the set heating type.
The display indicates the current temperature,
and below that the set core temperature.
)
)
)
4