Filter
Top Products
33
Preparing self-clean (pyrolysis)
9 CAUTION
Fire risk! Loose food remainders, fat and roast
juice can catch fire. Wipe out the oven interior
with a moist cloth.
▯ Remove coarse soiling and food remainders from
the oven.
▯ Clean the door seals manually, the inside of the
door and the glass pane because the self-clean
(pyrolysis) does not clean these parts.
▯ Remove all loose interior parts from the oven
interior. The slide-in racks are pyrolysis-proof.
There must be no objects left in the interior.
▯ Close the oven door.
Starting self-clean (pyrolysis)
1 Set the program selector to S.
2 The œ symbol is displayed. Confirm with ™.
3 The turn-off time for when the self-clean
(pyrolysis) will be completed is displayed. If
preferred, the turn-off time can be changed with
the rotary selector. Confirm with ™.
4 Remove all accessories and coarse soiling from
the oven interior. Confirm with ™.
5 Start with I. The cleaning time counts down on
the screen. If the turn-off time was changed, the
time until the self-clean (pyrolysis) starts counts
down on the screen. The oven light remains off.
After 3 hours, a signal sounds. A message will appear
on the screen. Once the appliance is cool, wipe out
the remaining ash from the oven with a damp cloth.
Note: The oven door is locked for your safety. After
cooling down, the door is unlocked as soon as the
temperature has dropped below 390 °F (200 °C).
Set self-clean (pyrolysis)
for both ovens
You can set the self-clean (pyrolysis) so that both
ovens are cleaned successively.
Between cleaning the first and second oven, the
appliance will cool down for approx. 1 hour. Self-clean
(pyrolysis) for both ovens takes approx. 8 hours.
To set self-clean (pyrolysis) for both ovens, turn both
rotary selectors to
S. Then set following the
instructions in Start pyrolysis.
Cleaning accessories with self-clean
(pyrolysis)
Gaggenau baking trays and grill trays are coated with
pyrolysis-proof enamel. To arrive at an optimum
cleaning result, you are nevertheless advised to
remove all accessories from the oven before the self-
clean (pyrolysis). Only this will ensure optimum heat
distribution.
If you would like to remove burnt-in residues from your
baking tray or your grill tray with self-clean (pyrolysis),
it is imperative that you observe the following notes:
Notes
‒ Remove extreme soiling, roast juice and food
remainders before self-clean (pyrolysis). Food
remainders, grease or roast juice can catch fire
during self-clean (pyrolysis).
‒ Only insert one baking tray or one grill tray in the
lowest shelf in the oven.
‒ Insert the baking tray or the grill tray fully.
‒ Do not clean the wire rack, rotisserie spit, cast
roaster, baking stone, core temperature probe or
other accessories with self-clean (pyrolysis).
3\URO\VLV
_
)