Filter
Top Products
Proper care and cleaning are important so your range will give you efficient
and satisfactory service.
Follow these
directions carefully in caring for it to
help assure safe and proper maintenance.
BE SURE ELECTRIC POWER IS OFF BEFORE CLEANING ANY PART
OF THE RANGE.
A
If your range is removed for cleaning, servicing or any reason,
be sure anti-tip device is re-engaged properly when the range
is replaced. Failure to take this precaution could result in tipping of
the range and cause injury.
AL
,.4
Oven Light Replacement
(on some models)
CAUTION: Before replacing your oven light bulb,
To replace cover:
disconnect the electrical power to the range at the
1. Place
it
into groove of the
light
receptacle. Pull
main fuse or circuit breaker panel. Be sure to let
the light cover and bulb cool completely.
wire forward to the center
of
the
cover
until it
~naps
into place. When in place. the wire holds the
co~er
The
t~ven
light
bLllb
is covered with a removable glass
firmly.
Be
certain the wire is in the depression in
cover that is held in
place
with a bail-shaped wire.
the center of the cover.
Remt>ve
the
oven
door, if desired, to reach cover easily.
2. Connect electrical power to the
range.
To remove:
1.
Hold a hand under the
cover so it doesn’t
fall
when
released. With fingers of’ the
-/
‘
(
3
‘,
same
hand,
firmly push back
the
wire
coJIer
holder. Lift off
~~-
1
1~
~\
~
\~&J~
L
-_
.
the
co~er.
Wire cover holder
DO
NOT REMOVE ANY SCREWS TO
REMOVE COVER.
2. Do not touch hot bulb with a wet cloth. Replace
bulb with
a
40-watt household appliance
bulb.
29