Filter
Top Products
A “HOT SURFACE” light will glow brightly when
any element is turned on, and will remain lit after the
unit is turned off until the surface is cool enough to
touch. Each element has its own “HOT SURFACE”
indicator light.
• It comes on instantly when the unit is turned on.
• It stays on even after the unit is turned off.
• It glows brightly until the unit is safe to touch.
OVEN
LIGHT
OFF
HI
LO
MED
OFF
HILO
MED
OFF
HI
LO
MED
OFF
HILO
MED
SURFACE
LIGHT
FRONT
REAR
REAR
FRONT
TIMER
CLOCK
STOP
TIME
COOK
TIME
TIMER
CLEAR
OFF
AUTO
SELF
CLEAN
OVEN
BAKE
HI
BROIL
LO
CONV.
BAKE
CONV.
ROAST
PROBE
HOT SURFACE
SURFACE CONTROLS
(continued)
Dual Surface Unit Switch (Glass Cooktops Only)
Hot Surface Indicator Light (Glass Cooktops Only)
The right front surface unit has
2 cooking sizes to select from so
you can match the size of the unit
to the size of the cookware you
are using.
To use the large (9 inch) surface
unit, push in the right portion of
the COIL SIZE switch next to the
control knob.
To use the small (6 inch) surface
unit, push in the left portion of the
COIL SIZE switch.
COIL
SIZE
9"
6"
SURFACE COOKWARE TIPS
(Electric Coil models only)
Cookware
Use medium- or heavy-weight cookware. Aluminum
cookware conducts heat faster than other metals.
Cast-iron and coated cast-iron cookware are slow to
absorb heat, but generally cook evenly at low to
medium heat settings. Steel pans may cook unevenly
if not combined with other metals.
For best cooking results pans should be flat on the
bottom. Match the size of the saucepan to the size of
the surface unit. The pan should not extend over the
edge of the surface unit more than 1 inch.
RIGHT WRONG
Not over 1 inch Over 1 inch
14
6″ 9″
A “HOT SURFACE” light will
glow brightly when any element
is turned on.