Filter
Top Products
18
FEATURES OF YOUR OVEN CONTROL
1. BAKE. Press this pad to select the bake function.
2. CONV. BAKE. Press this pad to select baking with
convection.
3. PROBE. Press this pad when using the probe to
cook food.
4. PROGRAM STATUS. Words light up in the
display to indicate what is in time display.
Programmed information can be displayed at any
time by pressing the pad of the operation you want
to see. For example, you can display the current
time of day while the timer is counting down by
pressing the CLOCK pad.
5. TIME DISPLAY. Shows the time of day, the times
set for the timer or automatic oven operation.
6. OVEN OR PROBE TEMPERATURE AND
BROIL DISPLAY. Shows the oven temperature,
probe temperature or broil setting.
7. FUNCTION INDICATORS. Words light up
to show whether the oven is in the bake, broil,
convection bake, self-clean mode or set mode
or if the probe is selected.
8. COOK TIME. Use this pad for Timed Baking,
Timed Convection Baking and Timed Convection
Roasting operations.
9. TIMER ON/OFF. Press this pad to select the
timer function. The timer does not control oven
operations. The timer can time up to 9 hours and
55 minutes.
To set the timer, first press the TIMER ON/OFF
pad. Then press the + or – pad to change the time.
To cancel the timer, press and hold the TIMER
ON/OFF pad until the word “TIMER” disappears
from the display.
10. BROIL. Press this pad to select the broil function.
11. CONV. ROAST. Press this pad to select roasting
with convection.
12. AUTO SELF CLEAN. Press this pad to select
the self-cleaning function. See the Operating the
Self-Cleaning Oven section.
13. INCREASE (+). Short taps to this pad increase
the time or temperature by small amounts. Press
and hold the pad to increase the time or
temperature by larger amounts.
14. DECREASE (–). Short taps to this pad decrease
the time or temperature by small amounts. Press
and hold the pad to decrease the time or
temperature by larger amounts.
15. CLEAR/OFF. Press this pad to cancel all oven
operations except Clock and Timer.
16. STOP TIME. Use this pad along with the COOK
TIME or AUTO SELF CLEAN pad to set the oven
to start and stop automatically at a time you select.
17. CLOCK. To set the clock, first press the CLOCK
pad. Then press the + or – pad to set the time of
day. Press the CLOCK pad to start.
If “F–and a number” flash in the display and
the oven control signals, this indicates function
error code. If function error code appears during
the self-cleaning function, check the oven door
latch—the latch handle may have been moved,
even if only slightly, from the latched position.
Make sure handle is to the right as far as it will go.
Press the CLEAR/OFF pad. Allow the oven to
cool for one hour. If function error code repeats,
disconnect power to the range and call for service.
CONV
DELAY
CLEAN
CLEAN
BROIL
TIMED
LOCK
PRE-
BAKE
ON
HR
+
–
COOK STOP ON TIMER
P
R
B
HI
BROIL
LO
+
–
OVEN
TIMER
BAKE
CONV.
BAKE
CONV.
ROAST
PROBE
AUTO SELF
CLEAN
CLEAR
OFF
COOK
TIME
TIMER
ON/OFF
STOP
TIME
CLOCK
1 2 3 4 5 6 7 8
9
10 11 12 13 14 15 16 17