GE JE1468L Microwave Oven User Manual


 
HOW TO USE THE MmUTE/SECO~ TMER
The Minute/Second Timer
Using a Holding Time
The Minute/Second Timer has 3 timing functions: The Minute/Second Timer can also be used to
It operates as a minute timer.
program a “holding time” between microwave
It can be set to delay cooking.
cooking functions. The time can range from 1 second
to 99 minutes and 99 seconds. A holding or standing
It can be used as a hold setting after defrosting.
time may be found in some of your own recipes or in
The Minute/Second Timer operates without
a cookbook.
microwave energy.
How to Time a 3-Minute Phone Call
Programming Delayed Cooking
Step 1: Touch MIN/SEC TIMER pad. To
delay
cooking
up
to 99 minutes and 99 seconds,
Step 2: Touch number pads 3
and
MINUTE pad
touch
either TIM-E COOK I & II, TEMP COOK
(for 3 minutes and no seconds).
& HOLD or AUTO ROAST and enter cook time,
Step 3: Touch START. Display shows time counting
temperature or code. Touch MIN/SEC TIMER and
down. The timer signals when time is up.
enter number of minutes to delay cooking. When
delaying
Temp
Cook & Hold or Auto Roast
cooking: be
sire
probe is in food.
Touch START.
Timer will count down to O and cooking will begin.
How to Defrost, Hold and Time Cook
Let’s say you want to defrost a frozen casserole for
Step 5: Touch 1,0 and MINUTE pad to hold for
15 minutes, hold for 10 minutes and then Time Cook
10 minutes.
for 25 minutes. Here’s how to do it:
Step 1: Take the casserole from the freezer and place
m
Step 6: Touch TIME COOK I & II
TIME COOK
pad
it in the oven.
I
TIME
DEFROST
I
Step 2: Touch TIME DEFROST.
1
J
I
&
II
Step 7: Touch 2, 5 and MINUTE pad for 25 minutes
of cooking time.
Step 3: Touch pads 1,5 and
MINUTE pad for 15 minutes
defrosting time. (Defrosting is
m
START
automatically set on power level 3
but can be changed by touching the
POWER LEVEL pad and the
desired power level.)
Step 4: Set standing or hold time by
touching MIN/SEC TIMER.
Step 8:
Touch START. As each
function is automatically performed,
oven display shows instructions
entered and the function. When
time is up, the oven signals and
flashes “End.”
10