Filter
Top Products
AUTO~TIC
ROAST~G
Auto Roast uses the temperature probe to cook
Just as in regular roasting, only tender roasts should
to the desired serving temperature. Unlike
Temp
be Auto Roasted until specified internal temperatures
Cook & Hold, which uses a single power level,
are reached. Less tender roasts should be microwaved
Auto Roast uses up to 3 power settings which
by time.
automatically switch during roasting, thus
providing even, tender cooking results without
overcooking.
Preparing Roasts for Auto Roasting
Place tender beef
roast in cooking
bag on trivet in
microwave-safe
dish. (Refer to
package instructions
for proper use of
cooking bag. ) Insert
probe through cooking bag horizontally into the
center meaty area not touching bone or fat. Make
sure the handle does not touch the food or top or
sides of the oven.
Place pork roast
in cooking bag
and place in
microwave-safe
dish.
Place meat in
oven with probe
to the right. Insert
cable end of probe
firmly into
receptacle on
oven wall.
m
‘
How to Auto Roast Beef Roast to Medium
Step 1: Touch AUTO ROAST pad.
Touch number pad 1. Touch START.
(See the “Auto Roast Guide” for
m
AUTO ROAST
Step
3:
After a
n
pre-programmed
food temperature is
comDlete
list of recommended
reached, oven beeps
cod;s. )
NOTE: By touching
the AUTO ROAST
pad during cooking,
the meat’s internal
temperature will be
disulaved.
(“COOL”
4 times and “HOLd”
CODE
oven then beeps 4 times
and “End” appears.
wifl
b;
displayed until meat reaches
90°F.)
When pad
is released, doneness code reappears on the display.
Step
2: When you select
Auto Roast codes 1 or 2,
the oven signals with 4
beeps
and “TURn”
w
flashes on the display
CODE
when it’s time to turn the
roast over. After you turn the roast, close the door and
touch START. (NOTE: Oven continues to cook after
the signal whether or not roast is turned over.)
16