Filter
Top Products
Internal temperature is the best test of doneness
Temp Cook& Hold takes the guesswork out of
for many foods.
cooking, because the oven automatically switches
Use Temp Cook& Hold to cook a variety of foods
to “Hold” setting after reaching the preset food
to the desired finished food temperature. The Time
temperature and maintains that temperature until
Cook I & II setting is recommended for batters,
you touch the
CLEAWOFF
pad.
doughs, frozen foods and foods which are difficult
NOTE: Oven automatically switches to “Hold”
to cook precisely with the probe.
when preset food temperature is reached.
The Temperature Probe
The temperature probe is a food thermometer that
gauges the internal temperature of your food. (Its
appearance may vary from picture at right.) The probe
must be used when using Temp Cook & Hold or Auto
Roast. To use the probe properly, follow directions in
the Automatic Roasting section.
How to Temp Cook a Rolled Beef Rib Roast to Medium
Step 2: Touch
TEMD
flonr
~’
Step 1: Insert temperature probe and attach probe
securely in oven wall. Close the door.
11
Lwwi.
-
m
Step 5: Touch the START pad. If
START
internal temperature of the roast is
less than
90°F.,
display will show
“COOL”; if temperature is
90°F.
or
I
--&-HoLD
--
I
““bu
‘au
above, display shows temperature
\
J
counting up.
Step 3: Touch 1,6 and O for
160°F.
Step 6: When
160°F.
is reached, the oven will sound
n
Step 4: Touch POWER LEVEL pad.
and-display “Hold.” The oven will then hold the
P:E::;
Touch 5 for medium power.
temperature.
m
Step 7: Touch the CLEAWOFF pad
to stop the cycle.
Step 8: Remove probe and food from the oven.
Cooking Tips
● Use a lower power level; foods ● Be sure frozen food has been
● Cover foods loosely for moisture
will heat more evenly though
completely defrosted before
control and quick, even heating.
requiring more time.
inserting probe. Probe may break
off if used in frozen foods.
Questions and Answers
Q. Why did “PRObE” flash on the display after I
Q. Can I leave my probe in the oven if it’s not
touched the START pad?
inserted in food?
A.
“PRObE” will flash if you don’t seat the cable A. No, if it touches the oven wall, it may damage
end of the probe securely into the receptacle in
the oven.
the oven wall or if you touch the TEMP COOK
& HOLD pad and forget to use the probe.
20