Filter
Top Products
Auto Cook Codes
Auto Cook codes 1 through 8
are designed to give you easy
automatic results with a number
of foods,
Code 1, designed for reheating
foods quickly, turns
the
oven off
automatically as soon as the sensor
detects steam from the foods.
When codes 2 through 8 are
A guide behind the oven door lists
selected, the oven determines how
cooking codes for frequently
much additional cooking time is
prepared fresh or uncooked foods
needed after steam has been sensed,
and appropriate codes are
automatically switches to TIME
recommended in the cooking guide
COOK and signals. The word
in the Automatic Cooking section.
“AUTO” on the display is then
replaced by countdown numbers
indicating remaining cooking time.
When the signal is heard, the oven
door may be opened for stirring,
turning or rotating food.
Example:
lAuTHooKl
Step 1: Place covered food in oven.
Word “AUTO” shows
Touch AUTO COOK pad. “ENTER
on display, indicating
COOK CODE” flashes on display.
1=(1
1~1—1
p
steam sensor is
1
[~(
I ~/
activated. DO NOT
Step 2: Touch number pad for
OPEN DOOR.
COOK
COOE
desired code. “CODE 2“ shows.
OPENING DOOR
After 4 seconds, “START” flashes
MAY AFFECT COOKING PERFORMANCE.
on display. Touch START.
Beep sounds when
“’’’’’e’s’:’”d
~
●
I=t=(
E’
1.
—[~f
by cook time. Rotate or
COOK
stir food, if necessary.
COOE
When done, oven beeps
every minute until door is opened or
CLEAWOFF
is touched.
How to Adjust Auto Cook Codes to Suit Your Taste
By simply adding a 1 after any Auto Cook code
If you want a longer cooking time than a code
number, you can set the oven to cook for
2070
less
provides, add a 9 after the code.
time than the code would regularly provide.
For the chicken in the example at
left,
code 59 would
For example, if code 5 cooks your chicken more done
provide 20% longer cooking time than the regular
than you
like
it, set code 51 next time and you’ll get
code 5 would provide.
20% shorter cooking time.
Example:
lAuTaooKl
Step 1: Touch AUTO COOK pad.
m
START
Step 2: Touch number pads 5 and
1
in that order. “AUTO CODE 4“
shows and after 4 seconds “START”
flashes on display.
Step 3: Touch START. “AUTO”
shows on display. DO NOT OPEN
DOOR until first oven signal, then
rotate dish 1/2 turn if necessary.
Close door and touch START to
finish cooking.
23