Filter
Top Products
-—
1“
v
to Set the Oven for Cleaning
Quick Reminder:
1.
Prepare the oven
for
cleaning.
2. Close the oven door completely.
3. Press the CLEAN pad.
4. Press the INCREASE or DECREASE
pad
until the desired Clean Time appears.
If the oven is too
hot
and you start to set a clean cycle,
the word “OFF” will appear in the display. Allow
additional time for cooling before you try to
set the cycle.
1.
Follow directions to prepare the oven for cleaning.
n
2. Press the CLEAN pad.
CLEAN
n
3. Press the INCREASE or
A
DECREASE pad until desired
~
Clean Time is displayed.
The Clean Time is normally 3 hours. You can change
the Clean Time to anytime between 2 and 4 hours,
depending on the amount of soil in your oven.
The self-clean cycle
will
automatically begin after
“CLEAN” is displayed and the time for the clean
cycle
is set. The words “ON” and “LOCK” will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until
the temperature
drops
below the
lock
temperature
;nd
the LOCK light goes off.
4.
When the LOCK light is off, open the door.
D
NOTE:
You can find out when the
STOP
clean cycle will be finished by pressing
TIME
the STOP TIME pad.
The word “door” will be displayed, the word “LOCK”
will flash and oven control will signal if you set the
clean cycle and forget to close the oven door.
To Stop a Clean Cycle
n
1.
Press the
CLEAWOFF
pad.
CLEAR
w
2. Wait until the oven has cooled below locking
temperature. You will not be able to open the
door right away unless the oven has cooled below
the locking temperature.
(continued next page)
19