GE JGRP16 Oven User Manual


 
Iiila
.
.
.
.
.
.
-/
.
,.,
,,
y;,..
C
m Light Replacement
CAUTION: Before replacing your oven light bulb,
disconnect the electric power for your oven at the
main fuse or circuit breaker panel.
Be
sum
to
let
the light cover
and
bulb cool completely
before removing or replacing them. When in use, light
bulbs
can
become
warm
enough
to break
if
touched
with
a
nl{)ist
cloth or towel. When cleaning, avoid
touching warm
lights
with cleaning cloths if the light
cover is removed.
The
o~en
light
(bulb) is covered with
a
removable
glass
cover
which is held in place with a wire. Remove
the oven door, if desired, to reach the cover easily.
To remove:
Hold your hand under
the cover so it doesn’t
fall when released. With
fingers of the same hand,
firmly push back the
wire cover holder. Lift
off the cover.
Wire cover
hblder
DO NOT REMOVE ANY SCREWS.
Replace bulb with 40-watt
home appliance bulb.
To replace cover:
Place it into the groove of the light receptacle. Pull
the wire forward to the center of cover until it snaps
in place. When in place, the wire holds the
co~er
firmly. Be certain the wire is in the depression in the
center of the cover.
Connect electric power to the oven.
Oven Shelves
The oven shelves may be cleaned with an abrasive
cleanser or steel wool.
After cleaning, rinse the
~b-l.es with
clean
water and dry with a clean
cloth.
N~
i’E:
The oven shelves may be cleaned in the
self-cleaning oven. However, the shelves may darken
in color, lose their luster and become hard to slide.
Wipe the shelf supports with cooking oil after
self-
cleaning to make the shelves slide more easily.
Control Panel
It’s a good idea to wipe the control panel after each
Do not use abrasive cleansers, strong liquid
use of the oven.
Clean with mild soap and water or
cleaners, plastic scouring pads or oven cleansers
vinegar and water, rinse with clean water and polish
on the control panel—they will
damage
the finish.
dry with a soft cloth.
A 50/50 solution of vinegar and hot water works well.
Painted Surfaces
Glass Surfaces
Painted surfaces include the outside oven door, control
To clean
the outside glass finish,
use a glass cleaner.
panel and drawer front. Clean these with soap and
Rinse and polish with a dry cloth. Do not allow the
water or a vinegar and water solution.
Do not use
water or cleaner to run down inside the openings in
commercial oven cleaners, cleansing powders, steel
the glass while cleaning.
wool
or harsh abrasives on any painted surface.
(con
finud
rwrfpuge)
23