Filter
Top Products
– 24 –
Door Assembly
WARNING: A microwave leakage test must be
performed any time a door is removed, replaced, or
adjusted for any reason. (See Diagnostic and Service
Information
.)
Door Removal
Caution: Do not close the door beyond the door
removal position. Damage to the inner door panel
will occur.
To remove the door, open the door fully and insert a
door removal tool (Part # WB01X10318) in each door
hinge opening. The door can then be slowly closed
a few inches to the door-removal position and lifted
from the oven.
Tool
Tool
Door Hinge Opening
Door-Removal Position
To disassemble the door:
Remove the 4 screws from the glass mount.
Remove the choke cover.
Remove the 4 screws from the door frame, and
remove door frame from the glass supporter.
Remove the 4 screws from the glass supporter,
and remove the door handle and vent trim from
the glass supporter.
1.
2.
3.
4.
SCB1000K and SCB1001K
ZSC1000K and ZSC1001K
Door
Handle
Door Glass
Door Panel
Choke Cover
Latch
Spring
Latch
Spring
Latch
Door
Frame
Door
Handle
Glass Mount
Door Glass
Choke Cover
Glass
Supporter
Latch
Spring
Latch
Spring
Latch
Door Deco
Door
Frame