Filter
Top Products
– 29 –
Caution: Do not twist the lamp.
The oven lamp is a 130-VAC, 20-watt lamp (Part #
WB08X10050). It is a plug-in type lamp.
Cavity Light
The oven lamp is inserted in a socket that is
attached to the lamp housing with 2 Phillips-head
screws. The screws are recessed from the top of the
outer cover. Access holes are provided. A magnetic
screwdriver is necessary to capture these screws.
It is necessary to remove the control panel to access
the oven lamp. (See Control Panel Assembly.)
The oven cavity light will come on during a
microwave cooking cycle.
Fuse
Important Note: The primary interlock, monitor
interlock, door sensing (secondary interlock)
switches, and the relay board must all be replaced
when the 20 amp fuse opens due to operation of the
monitor interlock switch.
The unit is equipped with a 20 amp fuse (Part #
WB27X10388).
The fuse is located in a receptacle near the top of
the noise fi lter and is common to all functions and
door switches.
Fuse
Note: If the fuse opens, it will disable all oven
functions including the display. The oven must be
partially removed to access the fuse. (See Oven
Removal / Partial Removal.)