Filter
Top Products
– 26 –
To remove the power board:
Remove the control panel assembly. (See Control
Panel Assembly.)
Disconnect wire harnesses from the power
board at locations CN4, CN7, and CN11.
Remove the 4 Phillips-head screws that attach
the power board to the control panel bracket.
Lift the power board to clear the retaining tab.
1.
2.
3.
4.
To remove the relay board:
Remove the control panel. (See Control Panel
Assembly.)
Peel back the foam tape.
Disconnect the wire harness from the power
board at location CN11 and release the harness
from the wire retainer.
Disconnect wire harnesses from the relay board
at locations CN1 and CN3.
Remove the 5 Phillips-head screws that attach
the relay board to the control panel bracket.
Lift the relay board to clear the retaining tab.
1.
2.
3.
4.
5.
6.
CN11
CN4
CN7
Tab
Wire Retainer
CN11
Foam Tape
Tab
CN1
CN3
(Continued Next Page)