Filter
Top Products
– 34 –
Upper Heater Assembly
The halogen heater has an approximate resistance
value of 1.8 to 3.7 Ω. It is connected using a white
wire harness.
The ceramic heater has an approximate resistance
value of 15 to 25 Ω. It is connected using a yellow
wire harness.
To remove the upper heater assembly:
Caution: Mark each of the wire harnesses
before disconnecting. The connectors could be
interchanged, causing an adverse effect in cooking
performance.
Remove the oven from cabinet or wall opening
and remove the outer cover. (See Oven Removal /
Partial Removal.)
Disconnect the heater assembly wire harnesses
and pull them through the wire guide.
Disconnect wires from the upper heater TCO.
1.
2.
3.
Remove the 2 Phillips-head screws, wire retainer,
and the heater shield from the heater assembly.
4.
Straighten the 4 folded lock tabs.
Remove the 8 Phillips-head screws that attach
the heater cover. Lift off the cover.
5.
6.
Remove the 3 Phillips-head screws that attach
the heater assembly to the oven chassis.
7.
Carefully lift the heater assembly from the oven
chassis.
8.
Lock Tabs