Filter
Top Products
– 40 –
Note: Each latch board is held in place with 2
Phillips-head screws. The screws are recessed
from the top of the outer cover. Access holes are
provided. A magnetic screwdriver is necessary to
capture these screws.
5. Remove the 2 Phillips-head screws that attach
the latch board to the oven chassis.
6. Remove the door switches from the latch board.
To replace the latch boards:
Place the oven in a partially removed position.
(See Oven Removal / Partial Removal.)
Open the oven door.
Remove the single Phillips-head screw that
holds the door switch access cover to the outer
cover.
Disconnect the switch wiring.
1.
2.
3.
4.