Filter
Top Products
The Problem Solver
_,I?ll[ Oven
Save time
& money, t
trouble_ boo tiTtg"
tips on the
fidlowi_tg pa_<_
first a!_d you ma)
not ne(,d to cal!
PROBLEM POSSIBLE CAUSE
OVEN WILL NOT •
WORK •
OVEN LIGHT(S)
DO NOT WORK
FOOD DOES NOT
BAI_] OR ROAST
PROPERLY
FOOD DOES NOT
BROIL PROPERLY
OVEN WILL NOT
SELF CLI_N
"CRACKING" OR
"POPPING" SOUND
DURING CL_LkNING
EXCESSIVE SMOKING
OCCURS DURING
CL_ING
OVEN NOT CLEAN
AFTER A CL_SkN
CYCLE
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
A thse in your home igI_/}be blown or the circuit breaker tripped.
The o_en controls are not properly set.
The men controls are set fl)r cleaning. If necessar}, allow the oven to cool;
then open the dora;
Make sure the O\en Mode knob is set to gAKE and the Temperature knob
is set toa tell/perattlre.
The light bulb is detective. Replace the bulb.
The oven is self-cleaning or the Sabbath teatnre is set. The oven lights do
/1o1 coine oll during sell:cleaning or if the Sabbath feature is set.
The o_en controls are improperly set. See the Baking'or Roa,_tin_'section.
Oven not preheated fi)r a hmg enough time (use approximatel} I0 to 15
inintltes).
Incorrect cookware or cookware of improper size being used. See the Pan
placement section.
Racks in the wrong position. See the Baki_" or I{oasIing"section.
Use a fl)il tent to slow down browning during roasting.
Oven thermostat needs a(!justment. See the ()r_enthermo,_talad/u,_tment
section.
This model is designed h)r closed door broiling only. Close the door. Always
broil with the door closed.
The o_en controls are not set at BROII, See the Broiling section.
The probe is plugged into the outlet in the o_en. Remme the probe ti'om
the o\en.
hnproper rack position being used.
Food is being cooked in a hot pan. rise the broiling pan and grid that came
with VO(lr()veil
Cook_are is not suited flw broiling. Use the broiling pan and grid that came
with VO(lr oven,
Numinum fi)il used on the broiling pan and grid has not been fitted
properly and slit as recommended.
In some areas the power (voltage) ma_ be low. Preheat the broil element
for approximately 10 to 15 rain utes.
The probe is plugged into the outlet in the oven. Remove the probe fl'om
the oven.
The oven temperature is to() high to set a self:clean operation.
Allow the oven to cool below the locking temperature and reset the
controls.
• The controls are not properly set. See the Sd/_(;leani_g Oven section.
• This is normal. This is tile sound of the metal heating and cooling
during both the cooking and cleaning functions.
• Excessive soil. Turn the Oven Mode and the Temperature knobs
to OFE Open tile windows to rid the room of smoke. _Elit until tile locked
door indicator light goes off. Wipe up excess soil and reset the clean cycle.
• The oven was heavily soiled. Clean up hear} spillovers beibre starting
the clean Qcle. Hemily soiled mens inav need to self:clean again.
• O_en is c(mnected to a 208V electrical supply. Set our cleaning
time flw 5 hours.
• The men controls are not properly set. See the Sd/_Cleaning" Oven section.
e
OVEN RACKS ARE The racks were cleaned in the self:clean cycle and now need periodic
DIrT/CULT TO SLIDE lubrication. Do not spray with Pare °':'or other lubricant spra}s. See Full
exlerlsiorl 0ve_t i_/c'hsin the Care arid Clearlirlg section.
41