12
Installationmustbedonein
accordance with all local and
national codes.
Use only materials which
conform to local codes in
effect. Be sure power is
disconnected before doing
anyelectricalwork.Allduct
workmustbemetal.
Do not use plastic duct.
The range hood should
never be exhausted into
a wall cavity or an attic
where an accumulation of
grease could become a re
hazard.
When the installation is
completed, turn on the fan
andmakesurethatthereare
noobstructionsintheduct.
30" Model
48" model
Venting Safety Guidelines
Vented Installation, Tools, Material, and Dimensions
Tools required to install vented hood: -Hammer -Slotscrewdriver
- Pliers - Electric drill
-Measuringtape -3/32”(3mm)Drillbit
-1/2”(13mm)Drillbit -SabresawORKeyholesaw
Materials Required:
-31/4"x10"(82.55mmx254mm)metalduct—enoughtogothroughwallorattictooutside.Elbowsasrequired.
-Roofcaporwallventhood
-Caulkingtosealaroundduct
-#6x1/2”(82.55mmx254mm)sheetmetalscrews
Theabovearestandardpartsandareavailableatanyhardwarestoreorheatingcontractor.
NOTE: A 3 1/4" x 10" (82.55 mm x 254 mm) exhaust adaptor is included with the exhaust hood.
52”
(132 cm)
with bottom drawer fully open
43-3/4”
(111 cm)
with oven
door open
0” clearance
to the back
3” (7.6 cm)
14”
(36 cm)
29-1/2”
(75 cm)
56”
(142 cm)
36-1/8”
(92 cm)
47-1/2”
(121 cm)
39-3/4”
(101 cm)
66-1/4”
(168 cm)
20”
(51 cm)
Range Hood Outlet
3-1/4” x 10”
(8.3 x 25.4 cm)
Oven
Exhaust
Power
Cord
Exhaust
Hood
Receptacle
52”
(132 cm)
with bottom drawer fully open
43-3/4”
(111 cm)
with oven
door open
0” clearance
to the back
3” (7.6 cm)
14”
(36 cm)
29-1/2”
(75 cm)
Range Hood Outlet
3 1/4"x10"
8.3 cmx 25.4 cm
66 1/4"
168.3 cm
62 3/8"
159 cm
56"
142.2 cm
36 1/8"
92 cm
29 3/4"
76 cm
13 3/4"
35 cm